DIY Frozen Inspired Tulle Pom Pom Wand

Hey! So this post is the first of many DIY. Just follow the instructions below to make your own Frozen Inspired Tulle Pom Pom Wand. The instructions do not show you how to make your own pom pom, ribbon wrapped dowel, spiral ribbons or diamond ribbons. All of the supplies needed for this wand can be purchased in sets of 5 from BAshley Creations!

This is what you will be making!

Just follow the pictures and instructions in order, and before you know it... You will be a wand making professional!

1. Make sure your hot glue gun is plugged in and hot. Take the ribbon wrapped dowel and find the end that is NOT sealed. 

2. Put a dot of hot glue on the end and cover it with the ends of the diamond ribbons. Make sure they are stuck pretty well. 

3. Next, find the sides of the ribbon wrapped dowel that are not being covered by the diamond ribbons. Put 1 dot of hot glue on each side and stick one curly ribbon end to each. 

4. Get the tulle pom pom. Find where the middle ribbon is and put a dot of hot glue. Get the small square of felt and cover the dot of glue. 

5. After the hot glue under the felt is cooled, put another dot of glue on top of the felt. Stick the end of the dowel you glued the ribbons to on the felt. Push firmly. The tulle pom pom should be stuck firmly to the ribbon wrapped dowel. 

6. When the glue is cooled, fluff your pom pom by gently moving the tulle in different directions make sure the middle ribbon is not showing. Use your scissors to trim off any tulle that is uneven with the rest of the pom pom. (Be care ful not to trim too much. Your pom pom will start to look like an egg and not a circle)

Your finished product should look like this. 

CONGRATULATIONS! You have just finished making your very one Frozen Inspired Tulle Pom Pom Wand! Xoxo!